|
|
|
Manufactured
Salt
Brine “MSB”
MSB has a sodium chloride concentration of 23% ±
0.3%, making it ideal for its intended use as a pre-wetter and anti-icing
solution. The eutectic point of 23.3% sodium chloride brine is approximately -21°C. There are no other added chemicals in MSB – only water and
rock salt. With consistent brine such as this, you can now reduce the risk of
unexpected re-freeze and slippery road conditions due to inconsistent chloride
blends. Accurately recording and analyzing the results of your snow
fighting efforts is now an integral part of every Salt Management Plan. KNOW
YOUR BRINE! Manufactured Salt Brine from RMES allows you to rest assured that each and every load will
produce the same results on the road. MSB is available in bulk tanker loads. RMES offers self unloading trucks that deliver right to your
location. Inquire about our full line of Storage Tanks and Transfer
Pumping Systems. RMES offers full
turnkey installations at competitive prices. The information contained herein is the best
information available to Road Maintenance Equipment & Services Inc. relating
to our equipment/products and the use of our equipment/products and is based on
information believed to be reliable. There
is no warranty, EXPRESSED OR IMPLIED in association with this product or its
use. Road Maintenance Equipment
& Services Inc. assumes no liability for any damages incurred in association
with the use of Road Maintenance Equipment & Services Inc.
equipment/products. The liability of Road Maintenance Equipment & Services
Inc. will be limited to the replacement/repair of equipment/products found to be
defective, or, at its option, refund of the purchase price. © All material contained in this document
is the exclusive property of Road Maintenance Equipment & Services Inc. and
may not be reproduced in any way without prior express written consent.
(PDF 37kb) |
|
© 2007 Road Maintenance Equipment & Services. All rights reserved. |